1 Channel Kinetic Wireless Switch Receiver

The Kinetic Series 1 Channel Kinetic Switch Receiver is the essential control module used with compatible kinetic wireless switches. While the wall switch sends the wireless signal, this receiver is the part that connects to the light circuit and physically switches the light on and off.

Designed for single lighting circuit control, the receiver is wired near or within the light fitting, ceiling rose, or suitable electrical enclosure. Once paired with a compatible kinetic switch, it receives the wireless signal from the switch and activates the connected light without the need for switch wiring between the wall switch and the light point.

Features:

• Works with compatible kinetic wireless switches.
• 1 channel kinetic switch receiver for single lighting circuit control.
  
• Receives the wireless signal from the switch and turns the light on or off.
  
• Ideal for installations where switch wiring is difficult or inconvenient.
  
• Compact for discreet installation near the light fitting or in suitable enclosure.
  
• No Wi-Fi required for operation.
  
• Suitable for renovations, retrofit projects, and additional wireless switch points.

Specifications:

• Dimensions: 2.2cm (h) x 5.5cm (w) x 3cm (d)
• Product: Kinetic Series 1 Channel Kinetic Switch Receiver
  
• Channels: 1 Channel
  
• Input Voltage: 220V AC
  
• Frequency: 50/60Hz
  
• RF Frequency: 433MHz
  
• Maximum LED Load: 300W
  
• Maximum Incandescent Load: 800W

Important

• Compatible kinetic switch required for operation.
• Install near the light fitting, ceiling rose, or in a suitable electrical enclosure.
  
• Check that the connected lighting load is within the receivers maximum rating.
  
• Installation should be completed by a qualified electrician.